Injection Moulding Plant Floor Cleaner
ACE-2 Factory Floor Cleaner is a water-based cleaner designed for oil and grease contamination in injection moulding plants. Its non-flammable formulation and low odour make it an alternative to consider for suitable industrial floor and equipment-cleaning applications. Cleaner floors. Safer people.
Stop Oil Spills Stopping Production
Effective Oil & Grease Cleaning for Moulding Plants
Hydraulic oil leaks, grease build-up and dust can create slippery floors and stubborn deposits around injection moulding machinery. These conditions can complicate housekeeping, increase cleaning time and interfere with routine maintenance.
ACE-2 Factory Floor Cleaner is an alkaline, water-based, non-solvent cleaner intended to help remove oil, grease, hydraulic fluid and suitable process residues from compatible surfaces. It can be applied using approved methods such as spraying, mopping or scrubbing.
Why Injection Moulding Plant Cleaning Matters
Oil spills and accumulated residues can affect housekeeping, workplace safety and maintenance routines. Addressing these issues helps keep production areas cleaner and easier to manage.
Hydraulic Oil Leakage
Oil from cylinders, pumps and hoses can spread across floors and drip trays, creating slippery surfaces and extra cleaning requirements.
Grease & Dust Sludge
Grease around tie bars, platens and clamps can trap plastic dust, forming stubborn deposits that need suitable cleaning.
Process Residue Build-Up
Oily deposits and process residues can collect around machinery and maintenance areas, complicating routine housekeeping.
Workplace Safety
Promptly managing spills and following site safety procedures helps reduce slip hazards and supports better housekeeping.
One Cleaner for Multiple Plant-Cleaning Areas
The supplied product information identifies the following potential applications. Always verify compatibility and instructions before use.
Injection Moulding Machines
Cleaning compatible external machine bodies, platens and tie bars affected by oil and general industrial residues.
Moulds & Dies
External cleaning and suitable pre-maintenance cleaning where the product is compatible with the surface.
Hydraulic Oil Spill Areas
Cleaning compatible floors and drip trays affected by hydraulic oil spills and accumulated grime.
Conveyors & Granulators
Cleaning suitable external surfaces where oil and plastic dust accumulate during plant operations.
Chillers & Compressors
External cleaning of compatible panels and accessible surfaces as part of planned maintenance.
Electrical Cabinet Exteriors
Only where the equipment is properly isolated and the approved cleaning procedure permits the product's use.
A Simple Four-Step Cleaning Process
Apply the cleaner using the approved dilution and cleaning method for the target surface and type of contamination.
Spray or Apply
Apply the diluted product using a suitable trigger or pump sprayer, mop or scrubber, following the product instructions.
Allow Dwell Time
Allow approximately 3–5 minutes for oil and grease to loosen, as stated in the supplied product details.
Scrub as Needed
Lightly scrub stubborn deposits where required. The supplied information indicates use with hot or cold water.
Wipe, Rinse & Dry
Remove loosened contamination and rinse or wipe as directed. Allow the area to dry before normal use.
Choose the Dilution for Your Cleaning Task
The ratios below are product-to-water ratios from the supplied product details. Confirm the final dilution against the latest product instructions before use.
| Application | Product : Water | Typical Cleaning Need |
|---|---|---|
| Heavy grease | 1:5 | Heavier oil and grease contamination |
| Normal cleaning | 1:10 | Routine floor and surface cleaning |
| Maintenance cleaning | 1:15 | Regular cleaning with lighter contamination |
Cleaner Floors. Better Maintenance. Smarter Cleaning.
A suitable water-based cleaning programme can help simplify housekeeping and reduce reliance on solvent-based products where the application allows.
Cleaner Work Areas
Helps address suitable hydraulic oil, grease and process residues, supporting more manageable cleaning routines.
Safety & Housekeeping
A non-flammable, low-odour formula can be considered for appropriate plant-cleaning applications alongside site safety controls.
Equipment Care
Regular removal of suitable residues can support cleaner equipment surfaces and planned maintenance activities.
Concentrated Cleaning
Dilution-based use may reduce ready-to-use product consumption. Actual cost savings depend on site conditions and usage.
ACE-2 Factory Floor Cleaner Specifications
Technical properties below are based on the product details supplied for this page.
Protect Your Production. Protect Your People.
Looking for a suitable floor-cleaning solution for your injection moulding plant? Contact ACE Enterprises to discuss your oil and grease cleaning requirements or request a sample for evaluation.